Site, structure & envelope · Fencing

Wood Picket Fences in Utah County

A wood picket fence is a low, open fence of spaced vertical boards — usually 36 to 48 inches tall — that marks a front yard or keeps a dog and a toddler off the sidewalk without hiding the house. Grandview builds picket fences in pine and cedar across Utah County under a B100 general contractor license, with posts, spacing, and finish specified to last here.

Discuss a project   Or call (385) 236-1741

Low wooden fence framing a front yard and lawn, the scale and openness a wood picket fence is built for

When a picket fence is the right fence

Pickets are the answer when a fence has to define a boundary without blocking the view — a front yard, a corner lot, a garden. If the goal is screening a backyard, a wood privacy fence does that job and a picket fence never will. For a long rural frontage, a split-rail fence covers more ground for less money. If you like the picket look but not the repainting, a vinyl picket fence is the honest alternative, and we’ll say so.

Front yards are where fence rules get specific. Most Utah County cities cap front-yard fences at three to four feet, well under the six allowed in back, and corner lots carry a clear-view triangle. A picket fence is usually the only wood fence that fits those limits without a variance. We confirm height and setback rules with your city before ordering material, and handle the HOA submittal where picket profiles and colors come from a pre-approved list.

What goes into a picket fence that stays straight

A picket fence shows every flaw because there’s nothing to hide behind. Spacing drifts and a rail set an eighth low reads as a sag from the street.

  • Pickets. Nominal 1×4 is the classic; 1×6 reads heavier. Tops are flat, dog-ear, gothic, or French gothic — the top profile is the biggest style decision and the one HOA guidelines name most often.
  • Spacing. A spacer block rides every picket, so the gap is identical from first post to last. A gap equal to picket width is traditional; tighter when a dog is part of the brief.
  • Rails and posts. Two 2×4 rails on edge between 4×4 posts six to eight feet on center. A short fence carries little wind load, but posts still go below frost depth — 30 inches or more along the Wasatch Front — because expansive clay doesn’t care how short the fence is. One heaved post lifts a run of pickets out of line in a single winter.
  • Fasteners. Hot-dipped galvanized or stainless ring-shank nails. Bright nails bleed black streaks down a painted picket within a season.
  • Clearance at grade. Pickets stop about two inches above grade so end grain isn’t wicking sprinkler overspray — where a pine picket rots first.
  • Slope. Because each picket attaches individually, a picket fence racks to follow grade in one continuous line instead of stepping in panels. Rails pitch; pickets stay plumb — the cleanest answer to the gentle slopes on bench lots in Provo and Orem.
Drill, bracket, and gloves on a wood project bench — the fastening work that keeps picket spacing consistent

Finish is part of the spec. We recommend factory-primed pickets so cut ends and rail faces are sealed before they go up. Utah’s elevation puts more UV on an exterior finish than most of the country sees, so painted pine pickets are realistically on a five-to-seven-year repaint cycle; a cedar picket fence can be stained or left to silver on a longer one. The first coat runs through our fence staining and painting work.

How a picket fence project runs

  1. Walk and measure. We confirm the property line and front setback, note sight triangles, and locate sprinkler lines.
  2. Pick the profile. Height, picket width, top shape, spacing, and color get settled on a one-page spec — the same sheet an HOA committee needs.
  3. Set posts and rails. Posts go in below frost depth and cure before rails are hung to a string line.
  4. Hang pickets. Every picket goes on against the spacer block and a top string, so the tops read as one line.
  5. Gate, finish, walk-through. A matching walk gate gets a diagonal brace so it doesn’t sag, the finish goes on, and we walk the run with you.

What does a wood picket fence cost in Utah County?

As ballpark planning numbers, not quotes, an installed pine picket fence along the Wasatch Front typically runs about $25–$45 per linear foot, with cedar and taller or heavier profiles at the top of that range and above it. Painting, gates, and old-fence removal price separately. A picket fence uses less lumber than a privacy fence, but every picket is fastened individually, so labor per foot doesn’t drop much.

What moves the number: height and picket width, the top profile (gothic tops are cut, not bought), spacing, corners and gates, grade changes, and whether pickets arrive primed. A straight 40-foot run on flat ground is the simple version; a corner lot with two gates and a slope is not. Budget range after the site walk, firm estimate once the profile is chosen.

Weathered painted wood picket fence showing the wear a Utah paint cycle has to stay ahead of

Questions we actually get

How tall can a front-yard picket fence be in Utah County?

Usually three to four feet, depending on the city and the fence’s distance from the sidewalk; corner lots also carry a clear-view triangle. Rules differ between Provo, Orem, Lehi, and the newer cities, so we verify with your city’s planning department before ordering material.

Pine or cedar for a painted picket fence?

If it’s getting painted, primed pine is the sensible choice — it takes paint well, costs less, and the paint is what protects it. Cedar earns its premium for a stained or natural finish, or where the run crosses wet, shaded ground that would rot pine pickets at the bottom edge first.

Will a picket fence keep my dog in?

A 36-inch fence holds most small and medium dogs if pickets are spaced at two to two-and-a-half inches and the bottom gap stays at two. Larger dogs and jumpers want 48 inches. We size spacing and height to the actual dog.

Do you build the fence and paint it, or do I need a painter?

We do both. Pickets go up primed and finish coats are scheduled under the same contract, so the fence isn’t sitting bare through a summer cloudburst waiting on a second trade.

Picket fencing is one option within our fence installation and repair work and our wider site, structure & envelope services. Our B100 license is verifiable at dopl.utah.gov.

Tell us what you’re working on

Send the rough footage, the height you have in mind, and a photo of the frontage. We reply within a couple of hours during business hours — a day at most.

Request an estimate   (385) 236-1741