Site, structure & envelope

Redwood decks in Utah County

A redwood deck uses the heartwood of coast redwood — naturally decay-resistant, unusually stable, and the deepest color of any softwood decking — for homeowners who want real wood and will keep a finish on it. Grandview designs, permits, and builds redwood decks across Utah County and Salt Lake County under a B100 general contractor license.

Discuss a project   Or call (385) 236-1741

Redwood deck chairs and table on a wooden deck overlooking a lake and mountains

When redwood is the right call over cedar, pressure-treated, or composite

Redwood tops the softwood decking ladder on three counts: it moves less with moisture than any other softwood we install, it checks and splinters less than cedar as it ages, and its heartwood resists rot without chemical treatment. The trade-off: it reaches Utah by special order from the California coast, and it costs accordingly.

A cedar deck is the closer, cheaper cousin — lighter, softer, more prone to surface checking — and the right answer for natural wood on a tighter budget. A pressure-treated deck is treated pine at the lowest entry cost. A composite deck asks nothing of you afterward but can’t be sanded or repaired by the board. For real wood that shrugs off dog claws, ipe is far harder than redwood, at a higher price.

Choose redwood when you want warm, even color underfoot, you’re matching existing redwood fence or pergola work, or your HOA guidelines favor natural materials. Skip it if nobody will pick up a stain brush every couple of summers.

Heartwood grade decides how long a redwood deck lasts

With redwood, the grade name matters more than the lumber yard. The heartwood — the deep red core — carries the tannins that resist decay and insects; the USDA Forest Products Laboratory rates it among the most durable domestic softwoods. The cream-colored sapwood has none of that protection and rots like untreated pine. Grades with “Heart” in the name (Construction Heart, Heart B, Clear All Heart) are all heartwood; grades without it (Construction Common, B Grade) allow sapwood, and much of the “redwood” on retail racks is exactly that.

For deck boards, stair treads, bottom rails, and anything that sits in snowmelt, we specify Construction Heart or better. Construction Heart carries tight knots and reads as a working deck; Clear All Heart is knot-free and priced to match — right for a small showcase deck, rarely for a 400-square-foot family platform. We check the grade stamp on every bundle before it comes off the truck. The plans may change. The standard does not.

Redwood grows only along the Pacific coast, so plan on a lead time measured in weeks and on 2×6 boards in fewer lengths than cedar. We order before footings go in so delivery never holds up the frame.

What building a redwood deck involves

The structure — pressure-treated framing on frost-depth footings, a bolted and flashed ledger, code-compliant railing — is covered on our main deck construction page. What changes with redwood is everything from the joist tops up.

  1. Tape the joists. Redwood holds moisture wherever it touches framing, so joist tape goes on before the first board.
  2. Acclimate the boards. Lumber from the coast arrives wetter than Utah’s dry air will let it stay. We sticker the bundle on site for several days so shrinkage happens before fastening, then gap boards an eighth to three-sixteenths of an inch. Install redwood wet and tight and the gaps open wide by August.
  3. Fasten with stainless steel. Redwood tannins react with iron — including the thin coating on bargain galvanized screws — and leave a black halo around every fastener within a season. We use stainless screws or stainless hidden clips on grooved boards, and pre-drill board ends.
  4. Finish within weeks. At our elevation, unfinished redwood grays out in one summer. After a brightener wash to remove mill glaze, we apply a pigmented penetrating oil with UV inhibitors — clear finishes don’t block sun.
Cordless drill, bracket, and work gloves on a wood decking board during installation

What does a redwood deck cost in Utah County?

As ballpark planning numbers, not quotes: a complete redwood deck in our market — frost-depth footings, pressure-treated frame, Construction Heart decking, stainless fasteners, standard railing, and a first coat of finish — typically lands around $55–$80 per square foot installed. That sits above pressure-treated, a step above cedar, and overlaps the lower half of composite. Clear All Heart pushes past that range.

  • Grade. Construction Common to Clear All Heart is the largest swing on the surface line — often more than the gap between redwood and cedar.
  • Fastening. Face-screwed stainless is the baseline; hidden clips cost more and leave a cleaner surface.
  • Railing. Redwood posts and cap over metal balusters is the common pairing; see our deck stairs and railings page.
  • Finish. Budget a recoat every one to three years depending on sun exposure.

Every project runs under a B100 license you can verify at Utah DOPL, inside our site, structure & envelope family. After a site walk you’ll get a planning range, then a firm estimate once grade and railing are chosen.

Finished wood deck with outdoor dining set surrounded by greenery

Questions we actually get

Is redwood a good deck material for Utah’s climate?

Yes, with one condition. Utah’s dry air means low rot pressure and little of the cupping that troubles redwood in humid climates, and it handles freeze–thaw swings better than most softwoods. The enemy is sun: elevation and UV gray unfinished redwood in a season. Heart-grade boards plus a pigmented finish on a schedule, and it lasts decades.

Why are there black stains around the screws on my redwood deck?

Tannins in the wood reacting with iron in the fasteners. Plain or lightly coated galvanized screws bleed black halos; so does steel furniture left on wet boards. An oxalic-acid brightener lifts the stains, but they return unless the fasteners are swapped for stainless.

How often does a redwood deck need restaining in Utah?

Every one to two years on south- and west-facing decks, two to three on shaded ones. Penetrating oils recoat without stripping; film-forming stains peel and demand sanding. If your frame is sound, our deck repair and restaining service can sand and refinish redwood rather than replace it.

Is redwood more expensive than cedar?

In Utah, usually yes — cedar comes from closer to home in more lengths, while redwood travels from the California coast in heart grades that carry a premium. The gap narrows between Construction Heart redwood and the better cedar grades, and redwood’s longer finish life claws some back over the deck’s lifetime. We’ll price both against your layout.

Tell us about the redwood deck you have in mind

We reply within a couple of hours during business hours — a day at most. You’ll get a straight read on grade, layout, footings, and budget before anyone commits to anything.

Request an estimate   (385) 236-1741