Renovation & Build-Outs · Tile & Stonework

Bathroom floor tile in Utah County

Bathroom floor tile installation is the one floor in the house that gets mopped, splashed, and stepped on wet every day, so it’s chosen for slip resistance and set over a substrate that won’t move. Grandview Contractors installs bathroom floor tile across Utah County and Salt Lake County under a Utah DOPL B100 general contractor license, as a standalone floor or inside a larger bath remodel.

Discuss a project   Or call (385) 236-1741

Bathroom with a freestanding tub set on a small-format hexagonal tile floor
Right fit

When a bathroom floor is its own tile job

This page covers the floor between the door threshold and the tub or shower curb. If water is hitting walls, you want shower tile and surrounds or tub surround tile, which are waterproofing assemblies first. For a kitchen, entry, or laundry, the ceramic and porcelain floor tile page covers drier rooms.

A bathroom floor sits between those two: a wet-duty floor with a fixture bolted through it, three or four plane changes in under sixty square feet, and more cuts per square foot than any other floor in the house. It gets its own layout even when it’s one line of a bathroom remodel.

Material decisions

Choosing tile that stays safe when it’s wet

The first filter is slip resistance, not color. Tile for floors that get wet should carry a wet DCOF of 0.42 or higher under the ANSI A326.3 method the Tile Council of North America publishes. Most porcelain sold for bathroom floors meets it; many polished tiles do not. We read the spec sheet before anything is ordered.

Format is the second decision. Small-format tile such as 2-inch hex, penny round, and 2×2 mosaic puts a grout joint under your foot every couple of inches, which adds grip and lets the floor follow a slope where it runs into a curbless shower. Larger tile, 12×24 and up, means fewer joints to clean but needs a flatter substrate and tighter lippage control where every edge lands near a wall or fixture. The small stuff is covered on the mosaic and accent tile page.

Porcelain is the default because it absorbs almost no water and shrugs off toilet-bowl cleaners. Natural stone works but must be resealed; Wasatch Front hard water etches unsealed marble around a vanity within a season.

Contemporary bathroom with a bathtub, a large window, and a black and white tiled floor
How it goes in

What a bathroom floor tile installation involves

  1. Check the substrate. A wood-framed floor needs joists stiff enough for tile, roughly L/360 deflection for porcelain and stiffer for stone, plus cement backer or an uncoupling membrane. A basement slab gets checked for cracks and moisture; many Utah County homes sit on expansive clay, and a slab that has already cracked gets a crack-isolation membrane rather than a hope. New drain penetrations are sealed as they’re closed, a small courtesy in Utah’s high-radon geology.
  2. Sequence the fixtures. Tubs and shower pans are set first so the tile runs to them. The toilet comes out and the flange is reset to sit on top of the finished tile, not a half inch below it, which is the most common cause of a rocking toilet and a wax-ring leak.
  3. Lay it out on paper. We center the layout on the sightline from the door, keep full tiles at the threshold, and push slivers behind the toilet or under the vanity toe-kick.
  4. Set, grout, and finish the edges. Tile is back-buttered for full mortar coverage. Floor-to-wall, floor-to-tub, and floor-to-curb joints get silicone, never grout. The threshold gets a transition sized to the hall floor’s height, not a lump of caulk.
  5. Seal and hand off. Cement grout gets sealed. Hard water across Provo, Orem, and most of the valley leaves mineral haze on dark grout quickly, so sealing is not optional here.

If a warming mat goes under the tile, see heated tile floors. Grandview holds the contract and manages the licensed plumbers and electricians for any drain relocation or floor-warming circuit; we coordinate, sequence, and quality-check that work inside your project.

Bathroom with double sinks, oval mirrors, and marble floor tile running to the vanity
Budget honestly

What does bathroom floor tile cost in Utah?

As ballpark planning numbers, not a quote, a bathroom floor in Utah typically runs about $12 to $30 per square foot installed, or roughly $1,200 to $3,500 for a hall or guest bath. It runs higher per foot than a kitchen floor because the room is small, the cut count is high, and the toilet has to come out and go back in. A real estimate follows a measured room.

  • Removing the old floor. Vinyl peels; old mud-set tile does not, and demo of a mortar bed can cost as much as the new tile.
  • Subfloor stiffening or slab repair. A few hundred dollars that prevents cracked grout in a year.
  • Tile size and pattern. Mosaic and herringbone set slower than a straight-lay 12×24; plan on 10 to 15 percent overage.
  • Fixture work. Resetting the toilet is included. Moving a drain or adding floor heat adds licensed plumbing or electrical work.

Questions we actually get

Do you tile under the vanity or around it?

Freestanding and furniture-style vanities get tile underneath so the floor is finished if the cabinet ever changes. A built-in vanity with a toe-kick gets tile up to it, which saves material and hides the least attractive cuts. We confirm the choice before layout, because it changes where full tiles land.

Can bathroom floor tile go over my existing vinyl or tile?

Rarely. An overlay raises the floor at the door and leaves the toilet flange recessed below the new surface, which is exactly how toilets start to leak. If the existing floor is sound and flat, a bonded overlay can work; otherwise removal and proper prep is the cheaper path over the life of the floor.

How long is the bathroom out of service?

Plan on three to five working days for the floor alone: demo and prep, setting, a day for mortar to cure, grouting, and a day before the toilet goes back. In a full remodel it’s sequenced after the tub or shower and before the vanity.

Is small hex tile hard to keep clean?

It has more grout, so it needs sealing and the right cleaner, but it’s also the grippiest floor you can put in a bathroom. With a mid-tone grout and a reseal every year or two, hex floors hold up well in Utah’s hard water. Very light grout is the choice people regret, not the tile size.

Bathroom floors are one scope inside tile and stone installation and the renovation projects Grandview runs. Our B100 general contractor license is verifiable at dopl.utah.gov. Good work should not require detective work.

Tell us what you’re working on

We reply within a couple of hours during business hours — a day at most. You’ll get a straight read on scope, sequence, and budget before anyone commits to anything.

Request an estimate   (385) 236-1741