Luxury Vinyl Tile Installation in Utah County
Luxury vinyl tile (LVT) gives you the look of stone or ceramic in a waterproof, warmer resilient floor, laid as squares or rectangles with or without real grout joints. Grandview Contractors installs LVT in kitchens, baths, basements, and commercial spaces across Utah County and Salt Lake County under a Utah DOPL B100 general contractor license.

When LVT is the right choice, and when a sibling is
Choose LVT when you want a floor that reads as tile — slate, travertine, marble, concrete — without the cold, the hardness, or the cracked-grout upkeep of the real thing. It’s the usual answer for a mudroom, a laundry room over a slab, a basement bath, or a rental kitchen that has to survive a decade of tenants.
For a wood look, you want luxury vinyl plank instead — same material, long narrow format, no grout question. For one continuous surface with no seams, sheet vinyl is cheaper. For the real thing in a shower, see ceramic and porcelain floor tile. LVT sits between them: tile geometry, vinyl forgiveness.
LVT is one niche within our flooring installation services, part of renovation and build-outs.
What goes into an LVT installation
LVT comes in two constructions, and that choice decides the rest of the job. Rigid-core click LVT (SPC or WPC) floats over an underlayment and tolerates a slightly imperfect slab. Glue-down (dryback) LVT is thinner, bonds with a pressure-sensitive or hard-set adhesive, and is the only construction that takes real grout cleanly. Trade-offs are on our glue-down vs floating vinyl page.
Format matters. 12×24 is the current default: it hides slab imperfections better than 18×18 or 24×24 squares and lays in a one-third offset that reads like set porcelain. Big squares need a flatter floor — any hump telegraphs across a 24-inch tile — so the format you choose can change the prep line in your estimate.
Wear layer predicts how the floor ages: 12 mil for bedrooms, 20 mil for kitchens, rentals, and pets, 28 mil and up for commercial. The print decides how convincing the stone look is; the wear layer decides whether it still looks that way in eight years.

How we lay out and grout a vinyl tile floor
- Test the slab. Most LVT in Utah goes over concrete — basements, converted garages, slab-on-grade homes. Vinyl is waterproof, but adhesive isn’t, and a slab wicking moisture from the expansive clay under much of the Wasatch Front will lift a glue-down floor from below. We run in-slab moisture testing before we order adhesive, not after the tiles bubble.
- Flatten. LVT shows everything beneath it. We grind highs, fill lows, and self-level where needed to roughly 3/16 inch over 10 feet — tighter for 24-inch squares. This subfloor prep and leveling step is what low bids leave out and most failures trace back to.
- Snap the layout. Tile floors are judged at the walls. We find the room’s true centerlines, dry-lay a row each direction, and shift the grid so cuts at opposite walls are equal and never less than half a tile. In an L-shaped kitchen, layout starts from the sightline at the doorway.
- Set. Glue-down tiles go into adhesive at the right open time, then get rolled with a 100-pound roller so every tile bonds fully. Click tiles get an expansion gap at every wall, covered by trim.
- Grout, if specified. Groutable LVT has a beveled edge; we space it at 1/16 to 1/8 inch and fill with a flexible acrylic grout made for vinyl — never cement tile grout, which cracks when the vinyl moves. No sealing required. Ungrouted LVT is butted tight for a cleaner look and an easier mop.
- Transition and finish. Reducers to carpet, T-moldings to LVP, flush thresholds at exterior doors, matched to the height stack so doors still swing.
What does LVT flooring cost in Utah?
As ballpark planning numbers, installed LVT in Utah County and Salt Lake County typically lands between roughly $5 and $10 per square foot — material about $2 to $6 depending on wear layer and format, labor on top, prep priced separately once we’ve seen the slab. Grouted installation adds roughly $1 to $2 per square foot. These are budgeting ranges, not quotes.
Toward the top of the range: large squares that demand a flatter floor, diagonal layouts, moisture mitigation on a damp slab, rooms with many fixtures and doorways. Near the bottom: rectangular tile in a one-third offset over a sound, dry subfloor.
Two Utah notes. In a basement, test for radon before the floor goes down — the EPA’s radon guidance is plain about it, Utah’s geology makes it worth the small cost, and our basement finishing team folds it in. And under big south-facing glass, high-elevation UV is harder on printed vinyl than samples suggest; there we steer you to a UV-stable wear layer and a lighter stone pattern that won’t show fading at the rug line.

Questions we actually get
Can luxury vinyl tile really be grouted?
Yes, if you buy groutable LVT — tiles with a beveled edge made for a joint. It takes a flexible acrylic grout designed for vinyl, not cement grout, looks like set tile from standing height, and never needs sealing. Standard LVT is butt-jointed with no grout, which many people prefer for mopping.
Does LVT work in a Utah basement?
It’s one of the best choices below grade: waterproof and warmer underfoot than ceramic. We moisture-test before choosing glue-down versus floating, and a damp slab gets a mitigation primer or a floating rigid-core tile. Test for radon before the floor goes down.
Can you install LVT over my existing ceramic tile?
Often, if the tile is well bonded and flat. We skim the grout joints with patching compound so they don’t telegraph through, then float a rigid-core LVT over it. Glue-down over ceramic is riskier. Added height at doors and appliances decides whether tear-out is the better call; we price both.
What makes one LVT quote higher than another?
Usually three things: wear layer (12 vs 20 vs 28 mil), whether subfloor prep is included or left as a surprise, and whether the joints are grouted. Ask every bidder what flatness they’re prepping to; that one number explains most price gaps.
Related services
LVT usually goes in with a bathroom remodel or kitchen refresh, sequenced after cabinets and before baseboard. Every Grandview project runs under one B100 license, verifiable at dopl.utah.gov.
Tell us what you’re working on
We reply within a couple of hours during business hours — a day at most. You’ll get a straight read on scope, sequence, and budget before anyone commits to anything.