Semi-Custom Cabinet Installation in Utah County
Semi-custom cabinets are factory lines that let you modify widths, depths, heights, and finishes box by box — most of custom’s fit at a production price. Grandview Contractors specifies, orders, and installs them across Utah County and Salt Lake County under a B100 general contractor license.

Semi-custom fits when stock sizes almost work and custom is more than you need
Stock cabinets come in fixed widths and one depth, so an awkward wall gets filler strips. Full custom builds every box to the inch. Semi-custom sits between: standard boxes in 3-inch increments, but the manufacturer will modify individual cabinets — a 10-inch-deep upper over a sink, a 27-inch-high base for a baking counter, an extended stile against an out-of-square wall — for a line-item charge instead of a custom shop’s price.
It’s the right call for most Utah kitchens where the layout is staying put and the walls are ordinary but not perfect, or where a tall-ceiling kitchen in a newer Lehi or Saratoga Springs build needs 42-inch uppers and stacked crown to land exactly at the ceiling.
If every box would need modifying, or you want curved fronts or a species the line doesn’t carry, custom cabinetry is the honest answer. If your boxes are sound and only the doors are dated, cabinet refacing costs a fraction of this. If budget is the whole conversation, stock cabinet installation is fastest. We’ll say which tier your room needs at the walkthrough.
Which modifications matter, and which just add line items
A semi-custom order is a spreadsheet of boxes, each carrying its own modifications. The ones that earn their cost:
- Depth reductions on uppers beside a window or over a cooktop, so doors clear trim and hoods.
- Height increases to 39- or 42-inch uppers, with a finished top rail so crown sits on the box instead of on a shim.
- Extended stiles and finished ends at walls and peninsulas — this is how semi-custom avoids the 3-inch filler strips that give stock kitchens away.
- Plywood box upgrade over furniture-board — holds screws better under heavy uppers and resists swelling if the dishwasher leaks.
- Drawer bases instead of door-and-shelf bases, with full-extension soft-close guides.

How a semi-custom cabinet order becomes an installed kitchen
- Field measure. Wall lengths at floor and counter height, ceiling height at every corner, trim, and rough-in locations. A wall a half-inch out of square shows up here, not on install day.
- Design and lock. The layout is drawn box by box with every modification called out. Orders are built to that spreadsheet, so a changed depth after ordering means a reordered cabinet and another lead time. We review the drawing with you twice before it goes in.
- Order and wait. Lead times generally run four to eight weeks, longer for painted finishes. Counters, appliances, and any kitchen remodel trades schedule around that date.
- Receive and inspect. Every box is uncrated and checked against the order — finish, door style, modification dimensions, damage — before demolition starts. A wrong box found afterward is two weeks without a sink.
- Set, scribe, hang. Bases go in level off the floor’s high point, shimmed and screwed into one run. Uppers are anchored through the hanging rail into studs — along the Wasatch fault, heavy cabinets fastened only to drywall are a known hazard. Stiles get scribed; crown goes on last.
- Template counters. Tops are templated off the installed boxes. Templating and fabrication adds one to two weeks, which is why boxes are ordered before slabs.
Like-for-like replacement in the same footprint generally doesn’t need a permit under current Utah-adopted code; relocating the sink or adding circuits does. The job runs under one general contractor license you can verify at dopl.utah.gov.
What semi-custom cabinets cost in Utah County
As a ballpark planning number, semi-custom cabinets installed in a typical Utah County kitchen land 30–50% above a comparable stock package and well under full custom — commonly $200 to $500 per linear foot before countertops. That’s a planning range, not a quote; a measured estimate follows the walkthrough.
Four things move the number. Box construction: plywood sides and backs add a flat percentage across the order. Finish: painted costs more than stained, specialty colors more than standards. Modification count: each depth, height, or stile change is its own charge, so twenty modified boxes is a different order from four. Accessories: pull-outs, corner systems, and integrated trash add a few hundred dollars per cabinet.
One Utah note on finish: at our elevation, UV through a big south- or west-facing window shifts stained cherry or walnut noticeably within a few years. Painted and lighter species hold color better, and the semi-custom catalog offers both without a custom upcharge.

Questions we actually get
What’s the real difference between semi-custom and custom cabinets?
Semi-custom modifies a factory line’s standard boxes within limits the manufacturer sets — set size increments, a fixed catalog of doors and finishes. Custom builds each box to any dimension, species, or style. If fewer than a third of your boxes need changes, semi-custom usually gets the same fit for less.
Can I change the order after it’s placed?
Rarely without cost. Semi-custom boxes are built to your order, so a change after acknowledgment usually means that cabinet is reordered at full price with a new lead time. That’s why we review the box-by-box drawing with you twice before submitting.
How long will my kitchen be out of service?
Not long, if the order is sequenced right. Boxes are received and inspected before demolition, so demo-to-set is usually two to four days, then one to two weeks for countertops. The old kitchen can usually keep working until the day before set.
Do semi-custom cabinets fit tall ceilings and uneven walls?
Yes — that’s their main advantage over stock. Height increases, stacked uppers, extended stiles, and reduced depths are standard modifications, and we scribe filler-free runs to walls that aren’t plumb. Past ten-foot ceilings or walls bowing more than an inch, custom may make more sense.
Related services
Semi-custom is one tier inside our cabinetry and countertop work. For the setting side in any tier, see kitchen cabinet installation; most semi-custom kitchens get quartz countertops. For everything else, start at renovation and build-outs.
Tell us what you’re working on
We reply within a couple of hours during business hours — a day at most. You’ll get a straight read on scope, sequence, and budget before anyone commits to anything.