Specialty · Accessibility

ADA parking & signage compliance in Salt Lake City

ADA parking and signage compliance means your accessible stalls, the signs that mark them, and the signs inside the building that direct and identify — entrances, restrooms, room numbers — all measure to the current ADA Standards. Grandview surveys, corrects, and documents that work for Salt Lake City and Utah County properties under a B100 general contractor license.

Discuss a project   Or call (385) 236-1741

Crew in hard hats laying out an accessible parking stall and access aisle before a concrete pour

When parking and signage is the scope that matters

Parking and signage show up in nearly every ADA demand letter, because they’re checkable from the street without entering the building. A sign mounted at 48 inches instead of 60, a van stall with no “van accessible” plaque, a restroom door with a paper sign and no tactile characters — these are the cheapest barriers to fix and the easiest to be cited for.

This page fits when the stalls and signs are the problem and the building’s bones are not. If the lot needs regrading or the pad rebuilt in concrete, our ADA parking and access aisle construction page covers the heavy work. If the trouble starts after the car door — curbs, cross-slopes, a stepped entry — you want path-of-travel upgrades or an accessible entrance retrofit. If nothing has been measured yet, an ADA compliance survey comes first.

What compliant accessible parking signage requires

The standard asks for a sign showing the International Symbol of Accessibility at each accessible space, mounted so its bottom edge sits at least 60 inches above the parking surface — high enough to read over a parked vehicle, and in Salt Lake City, high enough to clear the plow pile that lands against the curb every January. Van spaces add a “van accessible” designation. Lots of four or fewer spaces are the one exception: built accessible, but no sign required.

We install a reflective aluminum sign on a galvanized steel post set in a concrete footing. The footing matters more than it looks: the Wasatch Front’s hundred-plus freeze–thaw days a year will heave a shallow post and tilt the sign, so we set posts deep enough to stay plumb and keep the footing out of the access aisle. We also level every stall and aisle, because paint and posts can’t fix a slope — when the digital level reads 3 percent, we tell you before we stripe.

Building signage: where most compliance programs stop short

Parking gets fixed because it’s outside. Interior signage gets missed because it looks like decor. The ADA Standards treat signs identifying permanent rooms — restrooms, room numbers, exits, stairwells — as accessibility elements with precise rules, published at ada.gov for anyone who wants to check ours.

  • Tactile characters and braille. Permanent room signs carry raised uppercase characters, 5/8 to 2 inches tall, with Grade 2 braille directly below. A printed vinyl “Restroom” sign satisfies none of this.
  • Mounting height. The baseline of the lowest tactile character sits at least 48 inches above the floor and the highest no more than 60. Most signs we replace were hung at standing eye height, around 64 inches, and fail.
  • Location. On the latch side of the door, with an 18-by-18-inch clear floor space centered on the characters so a person can read by touch without the door swinging into them. Double doors and glass storefronts need a workaround we detail before ordering.
  • Directional and entrance signs. When not every entrance is accessible, the ones that are get the access symbol and the ones that aren’t point to the nearest one. An inaccessible restroom likewise needs directional signage to the accessible one.
  • Contrast and finish. Characters contrast with their background on a non-glare surface — a rule that trips up brushed-metal signs that photograph beautifully and read poorly.
Power drill, mounting bracket, and gloves laid out for installing a tactile room identification sign at the specified height

How a parking and signage correction runs

  1. Measure. Space count against the scoping table, slopes on every accessible stall and aisle, sign heights, and an interior walk with a sign inventory. Half a day for a typical Salt Lake City office or retail building.
  2. Schedule the signs. One list — every post sign, directional sign, and tactile room sign — with text, size, mounting height, and wall side. You approve it before anything is fabricated.
  3. Correct the lot. Restripe and hatch where paint is enough, set new posts and signs, and scope anything that needs concrete separately.
  4. Install and document. Signs go up to the schedule, each photographed with a tape in frame. You get a short closeout record for your property file and, if a demand letter started this, your attorney.

Exterior signs in Salt Lake City may need a sign permit depending on size and placement — verify with Salt Lake City building services, or let us carry that as part of the job. Our license is verifiable at dopl.utah.gov.

What does ADA parking and signage compliance cost?

Signage is the least expensive category of accessibility work, which is why it’s a poor reason to be sued. Ballpark planning numbers, not quotes: a post-mounted parking sign in a new footing usually lands in the low hundreds per stall; restriping and hatching adds a few hundred more; tactile room signs run from under a hundred dollars each for standard restroom signs to a few hundred for custom room numbers, plus installation. A complete signage package for a small commercial building often totals in the low thousands.

What moves it: sign count, custom finishes, how many posts need footings cored through asphalt, and whether the survey finds a slope or curb problem that turns a paint job into a concrete job. Elevation and UV along the Wasatch Front fade cheap printed faces fast, so we spec sheeting rated for it.

Modern office building interior with glass ceiling and steel framing where tactile room signage is mounted along the corridor

Questions we actually get

Can I fix the signs now and the parking slopes later?

Yes, and that’s often the right order. Signs and striping are a fast, inexpensive step that shows documented progress while concrete work is budgeted. The survey lists deferred items with measurements — what a good-faith phasing plan looks like to an attorney or a lender.

Do I need tactile signs on every door?

No. Tactile characters apply to signs identifying permanent rooms — restrooms, numbered rooms, exits, mechanical rooms. Directional or informational signs, and signs for spaces that change use, don’t need raised characters but still have to meet contrast and character-size rules.

What if snow covers the stalls in winter?

Accessible stalls and aisles have to stay usable year-round, and a plow pile in the access aisle is a barrier the same as a curb. We designate snow storage away from the accessible route and set sign posts tall enough to read above a typical Salt Lake City berm.

Tell us what you’re working on

Send the address, a photo of the accessible stalls, and the demand letter if there is one. Parking and signage is one scope in our accessibility retrofit work and the wider specialty family. We reply within a couple of hours during business hours — a day at most — with a straight read on what fails and what to fix first.

Request an estimate   (385) 236-1741