Vinyl, Fiberglass, Wood & Aluminum-Clad Windows
Frame material decides how a window ages at 4,500 feet, how it moves through a Utah winter, and what it costs to maintain. Grandview specifies and installs all four frame types under a Utah B100 general contractor license and tells you plainly which one your openings call for.

When the frame material is the decision that matters
Our other window pages are about the opening: a replacement or retrofit, a flanged unit on a new build or addition, or a double-hung versus casement choice. This page is about what the frame is made of.
It becomes the deciding question when a west wall has already chalked and warped one set of frames; when an HOA in Lehi, Saratoga Springs, or Eagle Mountain restricts exterior color and a dark frame has to survive both the approval and the sun; when new units must match original wood windows on a 1920s Provo bungalow; or when forty multifamily units make the vinyl-to-fiberglass delta a real line on the pro forma.
If the glass package is your bigger concern, our low-E and energy-efficient upgrade page covers U-factors and solar heat gain. The two decisions get made together, but they aren’t the same.
What each frame material actually involves
We are fond of straight lines and straight answers, so here is the comparison without brochure adjectives.
Vinyl
Extruded PVC frames with hollow or foam-filled chambers: the lowest-cost frame, paint-free, and a decent insulator. Its weakness is physical: PVC expands and contracts with temperature more than any other frame material, and dark colors absorb heat that can distort the frame on a hot exposure. With 100-plus freeze–thaw days a year along the Wasatch Front and UV stronger than at sea level, that movement is what we design around: welded corners, reinforced meeting rails on wider units, and light exterior colors unless the manufacturer rates a dark finish for high heat. Good vinyl suits most replacement work, rentals, and multifamily budgets; we steer away from it on oversized openings and dark west walls.
Fiberglass
Pultruded glass-fiber frames with a repaintable factory finish. Fiberglass expands at nearly the same rate as the glass it holds, so the glazing seal stays put through swings that work a vinyl seal loose. It holds dark colors without distortion, resists UV chalking, and carries narrower profiles, so more glass per opening. It costs more than vinyl and custom sizes take longer. Fiberglass is our usual recommendation for bench lots, exposed elevations, black-frame modern designs, and anyone planning to own the house for twenty years.
Wood
Solid pine, fir, or hardwood frames, finished on site or at the factory. Wood insulates well and is the only look that truly matches historic trim and millwork. The trade-off is maintenance: at Utah’s elevation a paint or stain film weathers faster than at sea level, and an unmaintained sill is where rot starts. We specify wood for historic matches and owners willing to repaint on schedule, and give every sill a sloped pan with a back dam, because wood forgives nothing when water sits on it.
Aluminum-clad wood
A wood frame inside, wrapped in aluminum outside with a baked fluoropolymer finish: wood’s interior with an exterior that shrugs off sun and never needs paint. It’s the highest-cost frame and the usual pick for custom homes and architect-led remodels. Cladding joints and the sill nose are the only places water can reach the wood core, so we seal those first and inspect them before trim goes on.
The U.S. Department of Energy’s summary of window frame types is a neutral reference for the thermal numbers behind these trade-offs.
How we specify a frame material
- Walk every elevation. We often specify fiberglass on a west wall and vinyl on a sheltered north wall of the same house.
- Check the existing frames. On replacement work, the old frame’s condition decides whether an insert is honest or the opening needs a full-frame unit, which changes which materials are on the table.
- Price the package, not the window. Material, glass, color, and finish are priced together so you see what a step from vinyl to fiberglass costs across the order.
- Clear the approvals. HOA color submittals and any permit for opening changes go in before the order is placed. Custom clad-wood lead times run weeks; an HOA objection after shipping is an expensive lesson.
- Install to the material. Vinyl gets expansion room at the shims; clad-wood gets its cladding joints sealed before the flange is taped; wood gets a primed sill. Then the same flashing sequence as every unit.

What moves the price between frame materials in Utah
Treat these as ballpark planning relationships, not quotes. For the same size, style, and glass package, fiberglass typically prices 20–40 percent above vinyl. Solid wood and aluminum-clad wood commonly land at one-and-a-half to two-and-a-half times vinyl, custom sizes at the top of that range. Labor is similar across materials on a straight replacement and diverges only when the material forces a full-frame install or trim rebuild.
Beyond the material, price moves with dark exterior colors (a premium on vinyl and fiberglass, standard on clad), oversized or arched units, and interior stain matching on wood. If opening the wall also means fixing the siding around it, that’s a separate line we’ll show rather than bury.

Questions we actually get
Do black or dark window frames hold up in Utah sun?
Fiberglass and aluminum-clad frames do; their finishes are built for it. Dark vinyl is the risk, since the frame absorbs heat and can distort unless the manufacturer rates that finish for high-heat exposure. If a dark frame is the look, we usually move you to fiberglass on exposed elevations.
Can you mix frame materials on one house?
Yes, and we often recommend it. A fiberglass unit with a painted interior sits next to a vinyl unit in the same color without anyone noticing. Keep exterior color and profile depth consistent on a single elevation and the mix disappears.
How much does stepping up from vinyl to fiberglass or clad-wood cost?
As a planning number, fiberglass runs roughly 20–40 percent above comparable vinyl, and clad-wood roughly one-and-a-half to two-and-a-half times. The step is smaller than it sounds on a whole-house order, because labor and flashing cost the same either way. We show the delta line by line after measuring.
Tell us what you’re working on
You’ll get a straight read on which frame fits, what it costs, and how it sequences with the rest of your window and door or envelope work. We reply within a couple of hours during business hours, a day at most; our license is verifiable at dopl.utah.gov.