Renovation & Build-Outs · Tile & Stonework

Steam shower & wet room tile in Utah

A steam shower is a sealed, sloped-ceiling room that holds hot vapor for an hour at a time; a wet room is a bathroom floor that is the shower pan. Both need a vapor-tight waterproofing assembly ordinary showers don’t, and Grandview Contractors builds and tiles them across Utah County and Salt Lake County under a Utah DOPL B100 license.

Discuss a project   Or call (385) 236-1741

Fully tiled contemporary bathroom with black and white tile running floor to ceiling
Right page, right scope

When this is the right scope, and when a neighbor page fits better

Two jobs that look like showers but behave differently. A steam shower adds a generator, a sealed door, and a ceiling that gets as wet as the walls. A wet room drops the curb and waterproofs the whole floor, so an open shower can drain anywhere in the room.

A curbed shower with an open top and a glass door belongs under shower tile and surrounds. The membranes and flood test every shower gets are detailed under Schluter and Kerdi shower waterproofing. Floor tile outside an enclosure lives under bathroom floor tile. All of it sits inside Grandview’s tile and stone work and renovation services, usually as one line of a larger bathroom remodel.

What the work involves

What makes a steam shower assembly different

A regular shower sheds water downhill. A steam shower fills with vapor that pushes into every joint, including the ceiling, and condenses inside whatever it reaches, so the waterproofing has to be a vapor retarder as well as a water barrier, continuous across all six surfaces.

  1. Framing and ceiling slope. The ceiling is framed to slope at least 2 inches per foot so condensation runs to a wall instead of dripping on the bench. The opening is framed for a full-height, gasketed steam door that seals to the header.
  2. Generator and controls. The generator sits in a vanity or closet within the manufacturer’s run length, with a dedicated circuit, water supply, drain, and a steam line pitched back toward the head. That is licensed electrical and plumbing work: Grandview holds the contract and manages the licensed electricians and plumbers who do it, and we coordinate, sequence, and quality-check it inside your project.
  3. Vapor-rated membrane on every surface. Standard shower membranes are rated for water, not vapor. A steam room gets a low-permeance product such as Schluter Kerdi-DS, or a liquid membrane built to its steam-room thickness, over walls, ceiling, bench, and pan, with preformed collars at the steam head and light. The Tile Council of North America handbook treats continuous-use steam rooms as a distinct assembly, and we build to it.
  4. Bench, light, and ventilation. The bench is a sloped, waterproofed box with membrane carried over its top and face. The light is a vapor-proof, shower-rated fixture sealed to the membrane.
  5. Tile, grout, and silicone. Porcelain is the usual pick because its near-zero absorption shrugs off heat cycling; natural stone can work but takes on moisture and needs sealing on a schedule. Epoxy or high-performance grout holds up to constant warmth and Wasatch Front hard water far better than cement grout. Every change of plane, including ceiling-to-wall, gets silicone.
Steel supply piping and a pressure gauge serving a steam generator installation
Curbless floors

What a wet room needs that a shower pan doesn’t

Removing the curb removes the dam. A wet room makes up for it by waterproofing the whole bathroom floor and pitching it toward a drain, so the room becomes the pan. Getting that slope in means recessing the shower area: dropping the subfloor between joists on a framed floor, or saw-cutting a basement slab. Utah County slabs often sit on expansive clay, so the recess gets a bonded membrane that moves with the concrete rather than a rigid liner that cracks with it.

Linear drains make curbless layouts work. A single-plane slope toward a trench drain at the wall lets large-format tile run through the shower unbroken, where a center drain would force small mosaics. The floor outside the spray zone still gets membrane and still pitches gently to the drain, and the door threshold is set so water never finds the hall.

Open-plan bathroom with a freestanding tub and continuous tile floor
Budget honestly

What does a steam shower or wet room cost in Utah?

As ballpark planning numbers, not a quote, a tiled steam shower in Utah County typically runs $12,000 to $25,000 including framing, vapor-rated waterproofing, bench, tile, and the generator with its electrical and plumbing, plus roughly $2,000 to $4,500 for a sealed steam door. A curbless wet room usually adds $3,000 to $8,000 over a standard tiled shower, driven by the floor recess and the larger membrane area. What moves the number:

  • Generator size and placement. Room volume, ceiling height, and tile choice set the kilowatt rating; a long run to a remote closet adds pipe, circuit, and labor.
  • Floor structure. Recessing a framed floor is carpentry; recessing a basement slab means cutting and re-pouring concrete.
  • Tile and grout. Porcelain with epoxy grout costs more per foot than cement grout but avoids the recurring sealing that stone and standard grout need under daily steam.

Grandview’s B100 license is verifiable at dopl.utah.gov. The generator circuit and water connections usually need electrical and plumbing permits; verify with your city building department.

Questions we actually get

Can my existing tiled shower be converted to a steam shower?

Usually not without retiling. The existing membrane is almost certainly water-rated, not vapor-rated, the ceiling is flat and unwaterproofed, and the door has a gap above it. A conversion means stripping to framing, resloping the ceiling, installing a vapor-rated membrane on all surfaces, and setting new tile, plus the generator rough-in.

Does a steam shower need a special door?

Yes. A steam door is full height, gasketed on all four edges, and sealed to the header with no gap at the top. A standard frameless shower door leaves a vapor path above and around it, so the room never holds steam and the bathroom ceiling outside takes the moisture instead.

Will a wet room flood the rest of my bathroom?

Not if it’s built as one. The entire floor is waterproofed and pitched toward the drain, the door threshold sits about a quarter inch above the lowest tile, and a linear drain sized for the showerhead’s flow keeps up. A fixed glass panel can define the spray zone without reintroducing a curb.

How much does hard water affect a steam generator?

Significantly. Wasatch Front water is hard, and a generator concentrates minerals every cycle. Plan for a model with auto-flush, place it where the drain valve is reachable, and consider a softener or inline filter ahead of the unit. Descaling intervals stretch from months to years with treated water.

Tell us what you’re working on

We reply within a couple of hours during business hours — a day at most. You’ll get a straight read on scope, sequence, and budget before anyone commits to anything.

Request an estimate   (385) 236-1741