Site, structure & envelope · Fencing

Composite Fences in Utah County

A composite fence is built from wood-plastic composite boards — the same material family as composite decking — on reinforced rails and steel-cored posts, for owners who want a real board look that never gets stained or replaced for rot. Grandview designs and installs composite fencing across Utah County and Salt Lake County under a B100 license, with posts sized for a fence that weighs roughly twice what cedar does.

Discuss a project   Or call (385) 236-1741

Modern minimalist house exterior with clean geometric lines, the architecture composite board fencing is usually chosen to match

When composite is the right call

Choose composite when you want the shadow lines of a board fence, you’re done with maintenance, and the budget can absorb the premium. It sits between its two nearest siblings: a wood privacy fence is cheaper on day one but needs stain every few years and eventually rots at grade; a vinyl privacy fence is also maintenance-free but reads as plastic up close and comes in a short list of colors. Composite gives you deep browns, greys, and charcoal with a wood-grain emboss, and the boards don’t check the way cedar does after a few high-desert summers.

It’s also the material behind most modern horizontal slat fences going up in Lehi, Draper, and Holladay, because composite holds a straight line across a horizontal span better than wood. Composite is one of a dozen styles under our fence installation and repair service, inside the broader site, structure & envelope family, and our license is verifiable at dopl.utah.gov.

Where it’s the wrong call: long frontage runs where the price per foot adds up fast, and lots that need a fence to breathe in canyon wind — a solid composite panel is heavy and catches every gust.

What goes into a composite fence that stays straight

Composite doesn’t rot, but it has its own physics. Weight, thermal movement, and UV decide how the fence looks in year ten.

  • Capped boards, not bare composite. Uncapped composite is wood flour and polyethylene all the way through; it fades noticeably in the first season and can stain. Capped composite bonds a co-extruded polymer shell over the core, which is what holds color. Manufacturers such as Trex publish multi-decade fade and stain warranties on their capped lines. At Utah’s elevation, where UV is stronger than most of the country, we spec capped product on every run that sees afternoon sun.
  • Posts sized for the load. A six-foot composite panel weighs about twice the same panel in cedar. That load lands on galvanized steel posts, aluminum posts, or a composite sleeve over a steel core — never a bare composite post, which flexes. Posts go at six-foot centers on exposed bench and north-county lots, eight feet at most on sheltered ones.
  • Reinforced rails. Composite has very little stiffness across a span. The bottom rail carries the full picket weight, so it gets an aluminum or steel insert, and horizontal-board systems hang boards in aluminum channels rather than face-screwing them to composite rails. Skip this and the fence sags between posts by the second summer.
  • Room to move — the other direction from wood. Wood swells with moisture; composite grows with heat, mostly along the length of the board. Between a January night and a July afternoon the Wasatch Front swings more than 100 degrees, so board ends get a gap at the post pocket sized to the install-day temperature. A dark composite fence assembled tight in February buckles in August.
Outdoor living space with composite-style decking boards and dining set, the same board material family used for composite fencing

How we install it

  1. Layout, locates, and HOA. We confirm the property line, mark gates, and call Blue Stakes. In HOA-dense communities, composite usually needs a sample board and a color approval; we prepare that submittal with you.
  2. Post holes below frost. Holes go 30 inches or deeper along the Wasatch Front, with wider footings in expansive clay — the extra panel weight gives frost heave more to work with, so footing size matters more here than under a vinyl or wood fence.
  3. Set steel first. Steel or sleeved posts are set in concrete, strung, and plumbed both ways. Gate and corner posts get the deeper footing.
  4. Rails, boards, caps. Reinforced bottom rails go in, boards drop into their channels with the expansion gap set for the day’s temperature, top rails lock the section, and caps are fastened mechanically rather than glued.
  5. Gates last. Composite gates need a welded aluminum or steel frame under the boards; a gate built from composite alone racks within a season. We hang them on adjustable hinges and tune the latch after the posts settle.
Power drill, metal bracket, and work gloves at a fence build — the hardware stage of hanging a framed composite gate

What does a composite fence cost in Utah?

As ballpark planning numbers, not quotes, installed six-foot composite privacy fencing along the Wasatch Front typically runs about $45–$80 per linear foot — well above comparable vinyl. Horizontal-board layouts, eight-foot heights, and framed gates sit at the upper end or above it; demolition of an old fence prices separately.

What moves the number on this product specifically: capped versus uncapped board, color (dark and multi-tone finishes carry a premium), the post system, the number of corners and framed gates, and grade changes, since most composite systems step rather than rack down a slope. The long-term math favors composite: no stain budget, no boards replaced for rot. We give a budget range after a site walk and a firm estimate once system, color, and layout are settled.

Questions we actually get

Will a composite fence fade in Utah sun?

Capped composite holds its color well; uncapped composite fades visibly in the first few months, then stabilizes at a lighter shade. Utah’s elevation puts more UV on a fence than most of the country, so we spec capped boards on sun-facing runs and tell you up front what the fade warranty actually covers.

Can composite fencing follow a sloped lot?

Usually by stepping, not racking. Composite boards sit in rigid channels, so each section stays level and the fence steps down the grade in increments — shorter sections and extra posts on steep lots, which we settle at the site walk. A few vertical-picket systems rack slightly; horizontal-board systems do not.

Do composite fences need different posts than wood or vinyl?

Yes. The boards are roughly twice the weight of cedar with little stiffness of their own, so the system relies on steel or aluminum posts, or composite sleeves over a steel core, set in concrete below frost depth. Bare composite posts and wood posts under composite panels are two shortcuts we won’t take.

Is composite worth the premium over vinyl?

If you want a wood look in a dark or multi-tone color, yes; vinyl can’t match it. If you only need solid screening in white or tan, vinyl does the same job for less. Composite costs more per foot but carries no finish schedule, so the gap narrows over a couple of decades.

Tell us what you’re working on

Send us the rough footage, the color you’re leaning toward, and a photo of the line. We reply within a couple of hours during business hours — a day at most — with a straight read on scope, sequence, and budget.

Request an estimate   (385) 236-1741