Faux & decorative paint finishes in Utah County
Faux finish painting covers limewash, Roman clay, Venetian plaster, color washes, and glazed or metallic effects — hand-applied finishes that give a wall depth flat color can’t. Grandview Contractors applies them across Utah County and Salt Lake County, licensed and insured under a Utah DOPL B100 general contractor license.

When a decorative finish is the right call — and when a good paint color is
A faux finish earns its cost when you want the wall itself to be the material — a mottled, mineral surface that shifts with the light rather than a uniform coat of color. Entry halls, fireplace walls, powder rooms, and restaurant dining rooms are where we apply it most. If what you actually want is one bold color on one wall, that’s an accent wall at a fraction of the cost. If the room just needs a clean refresh, single-room painting is the honest answer.
Decorative finishes also solve a problem paint can’t: a heavily patched wall that will never read flat under raking light. Limewash and clay are supposed to vary, so they hide the wall’s history instead of telegraphing it. Troweled Venetian plaster is the opposite — it wants a dead-flat substrate, and we’ll say so before you fall for a sample.
One caution for Utah County’s fast-growth cities. New homes in Lehi, Saratoga Springs, and Eagle Mountain keep settling for their first few years on bench and valley soils, and a hairline crack through troweled plaster is harder to blend than one through flat paint. On a home under three years old, we steer toward limewash or clay, which tolerate a touch-up, or suggest waiting on the plaster wall.
The finishes we apply, and what each one needs
Limewash. Slaked lime and mineral pigment, brushed in thin, overlapping cross-hatch strokes over a mineral primer. It cures by reacting with air, not by drying, so the first coat looks alarming and the third looks right. Two to three coats, no sheen, chalky by design; sealed in kitchens and baths.
Roman clay and lime plaster. Troweled, not brushed — thin skim passes with a flexible steel trowel, then a light burnish for a soft stone look. Clay needs a bonding primer and a tinted base coat so thin spots don’t flash white.
Venetian plaster. Tight trowel coats of lime putty, polished to a marble-like sheen and usually waxed. The most labor-intensive finish we do, and the most demanding of the drywall under it — a Level 5 skim is the usual prerequisite.
Glazes, color washes, strié, and metallics. A translucent glaze worked over a satin base with rags, brushes, or a dragging comb. These depend on open time — how long the glaze stays workable — and Utah’s dry air fights you. A glaze can set in minutes in July along the Wasatch Front, so we add extender, work smaller sections, and keep the house closed while the wall is wet.

We sample every finish on the actual wall at two times of day. Utah’s high-elevation light is intense, and a limewash that reads warm greige in the showroom can go cool and chalky at 2pm facing south.
How a decorative finish job runs
- Choose the finish, then the color. Limewash and plaster are mixed from pigment, not matched off a fan deck, so we bring sample boards in two or three tones and let you live with them a few days.
- Prepare the substrate for that finish. Glossy paint deglossed, old wallpaper and adhesive removed, patches feathered wide. Plaster gets a full skim; limewash gets a mineral primer and tinted base coat.
- Mask harder than usual. Lime and glaze travel, so adjacent ceilings, trim, and floors get full coverage, not a strip of tape.
- Apply in one continuous pass per coat. A decorative wall can’t be stopped halfway and picked up tomorrow without a seam, so each coat runs corner to corner with the crew it takes.
- Seal, wax, or leave raw — your call, made up front. Then a raking-light walk with you, a labeled jar of the mix for touch-ups, and written technique notes.
What does faux finish painting cost in Utah?
Along the Wasatch Front, limewash, color washes, and glazed finishes typically run roughly $5 to $12 per square foot of wall, and troweled Roman clay and Venetian plaster roughly $12 to $25 or more — labor is most of it. Treat those as ballpark planning numbers; a real estimate follows sample approval and a look at the walls.
What moves the price: how many coats or trowel passes the finish needs, whether a Level 5 skim comes first, ceiling height and stairwells, how many tones are layered, and whether the finish is sealed or waxed. Decorative painting is cosmetic work and needs no permit in Utah cities.

Questions we actually get
Can limewash or Roman clay go over regular painted drywall?
Yes, with the right primer. Limewash needs a mineral or lime-compatible primer to bond; over bare latex it can flake. Clay and plaster need a bonding primer and, for plaster, a flat skim coat. Glossy walls get sanded first. We confirm what’s on the wall before we quote the prep.
Will the finish look exactly like the sample?
Close, never identical — that’s the nature of a hand-applied mineral finish, and the reason to want one. Tone, stroke pattern, and how much the color mottles all shift slightly across a large wall. We sample on your wall under your light and get sign-off before we start.
How do you touch up a limewash wall after a scuff?
Dampen the area and feather in the same mix with a brush, blending outward — that’s why we leave you a labeled jar and the technique notes. Sealed finishes and Venetian plaster are harder to spot-repair, so we’ll talk through that trade-off before you pick a finish for a hallway or kids’ room.
Does a faux finish cost more than a feature wall in paint?
Usually several times more, because the labor is in the hand application and the coats, not the material. A painted accent wall is a few hundred dollars; the same wall in limewash is often one to two thousand, and more in polished plaster.
Related services
Decorative finishes are one piece of our interior painting work inside the renovation and build-out family, and often sit beside a trim and millwork upgrade. Our license is verifiable at dopl.utah.gov.
Tell us what you’re working on
We reply within a couple of hours during business hours — a day at most. You’ll get a straight read on scope, sequence, and budget before anyone commits to anything.